wlm54ag23 |
802.11 a/b/g 200mW miniPCI radio |
Status
| EOL
|
Part numbers
| wlm54ag23 = Compex WLM54AG 23db radio card, RoHS compliant
|
Chipset
| Atheros AR5413
|
Data sheet
| PDF
|
Connector
| u.fl, compatible with PC Engines I-PEX pigtail cables. Pigtail and antenna
must be ordered separately.
|
Issues
| Must use WRAP BIOS 1.11 or later to use Atheros single chip solutions.
Old BIOS does not keep PCI reset active long enough.
|
Note
| Wireless radio cards are ESD sensitive, especially the RF switch and the
power amplifier. To avoid damage by electrostatic discharge,
the following installation procedure is recommended:
- Touch your hands and the bag containing the radio card to a ground
point on the router board (for example one of the mounting holes). This
will equalize the potential of radio card and router board.
- Install the radio card in the miniPCI socket.
- Install the pigtail cable in the cutout of the enclosure. This will
ground the pigtail to the enclosure.
- Touch the I-PEX connector of the pigtail to the mounting hole
(discharge), then plug onto the radio card.
- Use external lightning protection for outdoor applications.
|
Compliance
| These cards are intended for professional use, not end-user installation.
|
Manufacturer
| Compex
|
Origin
| China
|
|
© 2002-2021 PC Engines GmbH. All rights reserved
. |